CLASSOL PRINTING INKS
Products >> CLTI TRANSFER SERIES >> Backup Coating Inks
Description: PFLB White is a screen printing litho back-up white for transfer coating on a litho graphic offset ink. This product gives high opacity cold peel transfers of photographic standard.
Application: Print (Semi-automatic m/c or automatic m/c) Heat set at 100-130 ⁰C for 30-60 seconds. Transfer temperature 180-190 ⁰C for 10 to 15 seconds with medium pressure, keep at room temperature and remove the paper.
Description: PFM gel is useful for mixing purpose. This ink offers a softer texture and can be peeled of easily after fusing. It is a perfect lubricant agent.
Application: Print (Semi-automatic m/c or automatic m/c) Heat set at 100-130 ⁰C for 30-60 seconds. Transfer temperature 180-190 ⁰C for 10 to 15 seconds with medium pressure, keep at room temperature and remove the paper.
Description: Trans white WB021 are water based heat transfer inks .It gives soft handed, vibrant and light weight screen prints. Water base heat transfers are PVC free.
Features:
- Eco-friendly.
- Good tacking strength and good ply adhesion.
- Provides excellent elasticity.
- Easily printable.
- Exhibits strong hot melt bonding strength.
- It does not dry or block screen during print.
Application: For best results, use 70-90T mesh. For achieving fine details and half tone image prints, 120T mesh can also be used. Curing at 140-160 deg C for 1.5-3 minutes.
Description: Trans GP Clear WB101 is an elastic soft feel transparent base used to achieve a feathery touch feel without losing elasticity and works as lubricant agent it gives a perfect transfer.
It works like rheological modifier.
Features:
- Eco-friendly.
- Good tacking strength and good ply adhesion.
- Provides excellent elasticity.
- Easily printable.
- Exhibits strong hot melt bonding strength.
- It resists repeated washes
Application: For best results, use 70-90 T mesh. For achieving fine details and half tone image prints, 120 T mesh can also be used. Curing at 140-160 ⁰C for 1.5-3 minutes.
Description: Trans Fixex WB FXR101 is a cross linking agent. It acts as a bonding agent. This pigment printing base are for light colour backgrounds that offers a feathery touch feel as extremely highly quality CMYK prints in Textile printing
Features:
- It does not dry or block the screen during printing.
- Good tacking strength and good ply adhesion
- Provides excellent elasticity
- Easily printable
- Exhibits strong
- Exhibits strong hot melt bonding strength
- It resists repeated washes
Application: For best results, use 70-90 T mesh. For achieving fine details and half tone image prints, 120 T mesh can also be used. Curing at 140-160 deg C for 1.5-3 minutes.
Application: Print (Semi-automatic m/c or automatic m/c) – natural dry for 5 hours – cure at 160 ⁰C for 30 sec – fuse at 180 ⁰C for 4 sec at 8 bar pressure.
Application: Print (Semi-automatic m/c or automatic m/c) – natural dry for 5 hours – cure at 160 ⁰C for 30 sec – fuse at 180 ⁰C for 4 sec at 8 bar pressure.